Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    PCB Depaneling Router Brazil and Argentina Distributor contact information
    Detailed Product Description

     Product Description:

    • Two-slide PCB Separator
    • Low Stress
    • Sharp cutting edge
    • Manual loading / unloading
    • High speed cutting by 4 axes control
    • Easy teaching with image processing


    YSVC-650 -PCB Depaneling Router Brazil and Argentina Distributor contact information

     Setting Fixture  2 stations
     Working Area  X:330mm, Y:330mm, Z:60mm
     Cutting Area  Max:X:330mm, Y:330mm
     PCB Component Height  Top side:15mm Bottom side:35mm(with universal jig),45mm(with specific jig)
     PCB Thickness 0.5 to 2.0 mm (It’s necessary to contact Aurotek in advance for over 2mm)
     Router Bit Diameter  0.8 ~ 2.0 mm(Option:Over 2.0mm)
     Precision of Cutting  ± 0.08mm
     Positioning Accuracy  ± 0.01mm
     Positioning Repeatability  ± 0.02mm
     Number of Axis in use  4 Axis (X, YL, YR, Z).
     Driving Speed (Max)  X, YL, YR : 1000mm/sec, Z: 750mm/sec
     Cutting Speed (Max)  X, Y, Z: 100mm/sec (It's according to the specification of Bit for the best speed setting )
     Spindle Motor  High speed variable frequency motor 250W (Max.58,000rpm)
     Bit Change  Manual
     Cutting Ability  Linear, Circular, U-curve, Arc, L-curve
     Motor of Axis  4 Axes (200W AC Servo motors)
     Bit Shift Count  Max. 2
     Route Planning  Direct coordinate input or manual guiding with × 10 CCD camera
     Safety Area Sensor  Standard
     Bit Break Detection  Standard
     Program Storage  HDD
     Program Backup  USB
     Operating System  Windows 7
     Man-Machine Interface  Touchscreen Industrial Monitor + Keyboard + Mouse
     Conveyor Adjustment  n/a
     Conveyor load capacity  n/a
     PCB Loading/Unloading  Manual
     Power Supply  3 Phase AC220V±5% 50 Hz/60Hz, 2.5 kw
     Air  0.5Mpa
     Dimensions  (W)1347mm × (D)1039mm × (H)1403mm + 524mm signal tower
     Weight  approx. 390 Kg
     Base Height  900mm
     Vacuum Cleaner  YSF-V553 3HP 2.2 kw
    Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator 

    Routing Bit Sectioning

    The user may set a designated distance, and have the routing bit shift down in order to make a new section of touting bit to cut boards for multiplying the life of the routing bit.

     

    2-Way Sliding Exchanger

    This work exchanger provides a simultaneously in-and out working space to limit the idle time, which in turn reaches the utmost output value.

     

    Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator  

    Multifunctional Automatic Tool/Blade Change System

    When the cutting blade reaches its limit, the system will replace with a new blade and resume production automatically. It dramatically reduce configuration time, maintenance related personnel cost.

     

    Tool Break Detection & Bit Drop Detection Sensor

    During every routing task, this system will detect any variable change of bit, and notice the user with alarm system. Due to the reason that the condition of routing bit directly influences the cutting performance, we set up bit drop sensor to examine whether the bit is clipped properly and the using condition of bit.

    Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator

    Safety Area Sensor

    Aurotek always pay our best attention to prevent any accident during operation with immediate stop function and abide by CE standard.

    Off-Line Edited Program

    The users only need to upload AUTO CAD DXF to Off-Line Edited Program, use mouse to simply create cutting program. Then use USB storage device to save the edited program and upload to machine USB port. Simple and efficient.

    Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator 

    Linking Barcode Module & CIM / MES Function

    In response to Industry 4.0 era, the new complete data-integration function can be easily setup and collects massive real-time production information and uploads it to the central terminal server instantly. Furthermore, to accompany to the needs of various manufacturers, this function is designed based on open source code for faster user customization. The new complete data-integration function allows the system manager to effortlessly monitoring the complete production status through a centralized monitoring center, and make any production schedule adjustment accurately and efficiently.

    Product Categories
                                PCB Depaneling Router Brazil and Argentina Distributor contact information
                                PCB Depaneling Router Brazil and Argentina Distributor contact information
                                PCB Depaneling Router Brazil and Argentina Distributor contact information
                                 
                                Detailed Product Description

                                 Product Description:

                                • Two-slide PCB Separator
                                • Low Stress
                                • Sharp cutting edge
                                • Manual loading / unloading
                                • High speed cutting by 4 axes control
                                • Easy teaching with image processing


                                YSVC-650 -PCB Depaneling Router Brazil and Argentina Distributor contact information

                                 Setting Fixture  2 stations
                                 Working Area  X:330mm, Y:330mm, Z:60mm
                                 Cutting Area  Max:X:330mm, Y:330mm
                                 PCB Component Height  Top side:15mm Bottom side:35mm(with universal jig),45mm(with specific jig)
                                 PCB Thickness 0.5 to 2.0 mm (It’s necessary to contact Aurotek in advance for over 2mm)
                                 Router Bit Diameter  0.8 ~ 2.0 mm(Option:Over 2.0mm)
                                 Precision of Cutting  ± 0.08mm
                                 Positioning Accuracy  ± 0.01mm
                                 Positioning Repeatability  ± 0.02mm
                                 Number of Axis in use  4 Axis (X, YL, YR, Z).
                                 Driving Speed (Max)  X, YL, YR : 1000mm/sec, Z: 750mm/sec
                                 Cutting Speed (Max)  X, Y, Z: 100mm/sec (It's according to the specification of Bit for the best speed setting )
                                 Spindle Motor  High speed variable frequency motor 250W (Max.58,000rpm)
                                 Bit Change  Manual
                                 Cutting Ability  Linear, Circular, U-curve, Arc, L-curve
                                 Motor of Axis  4 Axes (200W AC Servo motors)
                                 Bit Shift Count  Max. 2
                                 Route Planning  Direct coordinate input or manual guiding with × 10 CCD camera
                                 Safety Area Sensor  Standard
                                 Bit Break Detection  Standard
                                 Program Storage  HDD
                                 Program Backup  USB
                                 Operating System  Windows 7
                                 Man-Machine Interface  Touchscreen Industrial Monitor + Keyboard + Mouse
                                 Conveyor Adjustment  n/a
                                 Conveyor load capacity  n/a
                                 PCB Loading/Unloading  Manual
                                 Power Supply  3 Phase AC220V±5% 50 Hz/60Hz, 2.5 kw
                                 Air  0.5Mpa
                                 Dimensions  (W)1347mm × (D)1039mm × (H)1403mm + 524mm signal tower
                                 Weight  approx. 390 Kg
                                 Base Height  900mm
                                 Vacuum Cleaner  YSF-V553 3HP 2.2 kw
                                Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator 

                                Routing Bit Sectioning

                                The user may set a designated distance, and have the routing bit shift down in order to make a new section of touting bit to cut boards for multiplying the life of the routing bit.

                                 

                                2-Way Sliding Exchanger

                                This work exchanger provides a simultaneously in-and out working space to limit the idle time, which in turn reaches the utmost output value.

                                 

                                Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator  

                                Multifunctional Automatic Tool/Blade Change System

                                When the cutting blade reaches its limit, the system will replace with a new blade and resume production automatically. It dramatically reduce configuration time, maintenance related personnel cost.

                                 

                                Tool Break Detection & Bit Drop Detection Sensor

                                During every routing task, this system will detect any variable change of bit, and notice the user with alarm system. Due to the reason that the condition of routing bit directly influences the cutting performance, we set up bit drop sensor to examine whether the bit is clipped properly and the using condition of bit.

                                Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator

                                Safety Area Sensor

                                Aurotek always pay our best attention to prevent any accident during operation with immediate stop function and abide by CE standard.

                                Off-Line Edited Program

                                The users only need to upload AUTO CAD DXF to Off-Line Edited Program, use mouse to simply create cutting program. Then use USB storage device to save the edited program and upload to machine USB port. Simple and efficient.

                                Taiwan Excellence High Driving Speed 1000mm/ sec Twin Table PCB Separator 

                                Linking Barcode Module & CIM / MES Function

                                In response to Industry 4.0 era, the new complete data-integration function can be easily setup and collects massive real-time production information and uploads it to the central terminal server instantly. Furthermore, to accompany to the needs of various manufacturers, this function is designed based on open source code for faster user customization. The new complete data-integration function allows the system manager to effortlessly monitoring the complete production status through a centralized monitoring center, and make any production schedule adjustment accurately and efficiently.

                                Online Message
                                Welcome message, we will reply within 24 hours!
                                *Subject:
                                *Your E-Mail:
                                (Please make sure your E-mail address is correct.
                                Else, the receiver cannot reply you afterwards. )

                                Content:
                                *Country/Region:
                                Your Company:
                                Your Name:
                                Tel:
                                Fax:
                                YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                CONTACT US
                                Contacts:Eva Liu +86 13416743702
                                Tel:+86-512-62751429
                                Skype:evaliuhuan
                                Email:sales@yushunli.com evaliu@hk-yush.com

                                Address: Building H, GuoRui Pioneering Park,
                                No. 1068 Jinyang East Road, Lujia Town, Kunshan,
                                Suzhou.

                                Postcode:215331
                                Dongguan Factory Address: 5th Floor, No.10, Shanquan Road,
                                Yongtou Village, Chang’an Town, Dongguan City, Guangdong
                                province, China.

                                Postcode:523843
                                YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016