关闭
点击这里给我发消息
点击这里给我发消息
 +86 0512-62751429
+86 13416743702
Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    High Quality Fpc light belt Cutting Machine
    Detailed Product Description

    High Quality Fpc light belt Cutting Machine Equipment introduction:   

    Flex PCB Circuit Automatic depaneling is an automated depaneling device developed and patented by Suzhou Yu Shun Li Electronics Co., Ltd. based on the needs of the T8LEDFlex light belt on the market today. It is targeted at the Flex PCB Circuit of the Flex PCB Circuit circuit board Depressed, according to the width of the customer requirements of the width of the board width of the full-page cutting, the cutting effect is good, fast, much customer-friendly; for different sizes and specifications of the LEDFlex PCB Circuit products; to solve the customer manual depaneling slow, cutting poor results problem;

    Features:

    1, for Flex light belt, Flex PCB circuit, Flex light bar circuit board LEDFlex light belt, Flex PCB Circuit, Flex light bar for cutting;

    2, manually adjust the cutting blade module level, to solve the Flex PCB circuit thickness of the problem;

    3, v cut with V groove guide to ensure product quality;

    4, high efficiency: Vmax = 400mm / s, and the speed adjustable;

    5, high precision, easy maintenance, high security;

    6, the machine is simple, easy to use, solid and durable;

    7, cutting mode lifting range: 25mm;

    8, for different width of the Flex PCB Circuit, only need to replace the knife and fixture can be, easy to adjust;

    9, cutting mode using left and right recycling, improve cutting efficiency;

    Main configuration:


    Configuration name
    unit
    Quantity
    Remarks
    Drive motor
    set
    2
    Reese step
    Screw guide
    set
    3
    Taiwan HIWIN
    Pilot cylinder
    set
    5
    Star Pneumatic
    man - machine interface
    set
    1
    Taiwan Weilun
    Industrial control system
    station
    1
    Industrial PLC
    cutting Knife mold
    set
    1
    Imported tungsten steel mold
    Control software
    set
    1
    Pinyao-auto
    Timing belt
    set
    1
    Import mute timing belt
    The electromagnetic valve
    set
    3
    Yade off
    Switching power supply
    set
    1
    Taiwan Mingwei
    air filter
    One
    1
    Brave Pneumatic

    2. technical parameters


    Equipment model
    YSVC-1200
    YSVC-1500
    length
    1200mm
    1500mm
    speed
    500mm/sec

    Repeat accuracy
    ±0.02mm

    Resolution
    0.01mm

    operating system
    PLC + man - machine interface

    transfer method
                Precision stepper motor + synchronous technology

    Cutting mode
                    High precision rotating tungsten steel

    Targeting
                   Positioning fixture + cylinder in place

    Working power supply

    AC220V  50-60HZ   1.0KW


    Machine size

    1350╳950╳1120mm

    1650╳950╳1120mm
    equipment weight

    350KG  

    450KG
    Product Categories
                              Location: Home -> Our Customer
                              High Quality Fpc light belt Cutting Machine
                              High Quality Fpc light belt Cutting Machine
                              High Quality Fpc light belt Cutting Machine
                               
                              Detailed Product Description

                              High Quality Fpc light belt Cutting Machine Equipment introduction:   

                              Flex PCB Circuit Automatic depaneling is an automated depaneling device developed and patented by Suzhou Yu Shun Li Electronics Co., Ltd. based on the needs of the T8LEDFlex light belt on the market today. It is targeted at the Flex PCB Circuit of the Flex PCB Circuit circuit board Depressed, according to the width of the customer requirements of the width of the board width of the full-page cutting, the cutting effect is good, fast, much customer-friendly; for different sizes and specifications of the LEDFlex PCB Circuit products; to solve the customer manual depaneling slow, cutting poor results problem;

                              Features:

                              1, for Flex light belt, Flex PCB circuit, Flex light bar circuit board LEDFlex light belt, Flex PCB Circuit, Flex light bar for cutting;

                              2, manually adjust the cutting blade module level, to solve the Flex PCB circuit thickness of the problem;

                              3, v cut with V groove guide to ensure product quality;

                              4, high efficiency: Vmax = 400mm / s, and the speed adjustable;

                              5, high precision, easy maintenance, high security;

                              6, the machine is simple, easy to use, solid and durable;

                              7, cutting mode lifting range: 25mm;

                              8, for different width of the Flex PCB Circuit, only need to replace the knife and fixture can be, easy to adjust;

                              9, cutting mode using left and right recycling, improve cutting efficiency;

                              Main configuration:


                              Configuration name
                              unit
                              Quantity
                              Remarks
                              Drive motor
                              set
                              2
                              Reese step
                              Screw guide
                              set
                              3
                              Taiwan HIWIN
                              Pilot cylinder
                              set
                              5
                              Star Pneumatic
                              man - machine interface
                              set
                              1
                              Taiwan Weilun
                              Industrial control system
                              station
                              1
                              Industrial PLC
                              cutting Knife mold
                              set
                              1
                              Imported tungsten steel mold
                              Control software
                              set
                              1
                              Pinyao-auto
                              Timing belt
                              set
                              1
                              Import mute timing belt
                              The electromagnetic valve
                              set
                              3
                              Yade off
                              Switching power supply
                              set
                              1
                              Taiwan Mingwei
                              air filter
                              One
                              1
                              Brave Pneumatic

                              2. technical parameters


                              Equipment model
                              YSVC-1200
                              YSVC-1500
                              length
                              1200mm
                              1500mm
                              speed
                              500mm/sec

                              Repeat accuracy
                              ±0.02mm

                              Resolution
                              0.01mm

                              operating system
                              PLC + man - machine interface

                              transfer method
                                          Precision stepper motor + synchronous technology

                              Cutting mode
                                              High precision rotating tungsten steel

                              Targeting
                                             Positioning fixture + cylinder in place

                              Working power supply

                              AC220V  50-60HZ   1.0KW


                              Machine size

                              1350╳950╳1120mm

                              1650╳950╳1120mm
                              equipment weight

                              350KG  

                              450KG
                              Online Message
                              Welcome message, we will reply within 24 hours!
                              *Subject:
                              *Your E-Mail:
                              (Please make sure your E-mail address is correct.
                              Else, the receiver cannot reply you afterwards. )

                              Content:
                              *Country/Region:
                              Your Company:
                              Your Name:
                              Tel:
                              Fax:
                              Related Product
                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                              CONTACT US
                              Contacts:Eva Liu +86 13416743702
                              Tel:+86-512-62751429
                              Skype:evaliuhuan
                              Email:sales@yushunli.com evaliu@hk-yush.com
                              Company Address:3 Building NO 11,Chunhui Road,
                              Suzhou Industrial Park,Jiangsu Province.China.
                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016