关闭
点击这里给我发消息
点击这里给我发消息
 +86 0512-62751429
+86 13416743702
Welcome to YUSH Electronic Technology Co.,Ltd.
YUSH Electronic
  English    Chinese
    Four-axis precision PCB Router Depanleing machine
    Detailed Product Description


    Basic specifications:
    01.   X, Y cutting speed: 0 ~100mm/s
    02.   Machine Repeat Accuracy: ± 0.01mm
    03.   X, Y1,Y2 ,Z Control Methods: Industrial IPC and PC
    04.   X, Y1,Y2 ,Z Drive Mode: AC Fiber Optic Servo Motor
    05.   Machine Operation and Data Storage: PC System
    06.   Cutting accuracy: ± 0.05mm
    07.   Spindle speed: Max 60000rpm
    08.   Host voltage: 220V 1ψ 50 / 60HZ
    09.   Air pressure supply: above 4.5kg/cm2
    10.   Power Consumption: 1.8KVA
    11.   Dust Collection: Lower Dust Collection (Standard) or Upper Dust Collection
    12.   Dust collector voltage: 220V (380V) 3ψ
    13.   Upper dust collector size: L650*W400*H1350mm
    14.   Dust collector size: L665*W635*H1650mm

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    Technical Parameters

    Statistics function

    Both left and right board with statistics function

    Information management function

    Support MES information system to seamlessly connect equipment and information management, Open Ethernet Interface, and supports TCP/IP network communication protocol, and necessary related software and programs; Open the BAR CODE function port.

    X.Y, Z, axis drive

    Servo motor + screw, guide rail

    Worktable input and output methods

    Servo motor + screw, guide rail

    Cutting product requirements

    Left and right worktables can separate different products at the same time

    Cutting height requirements

    Left and right worktables can separate different heights and products at the same time

    MARK point identification requirements

    MARK points of different shapes can be identified, and MARK points can be freely set before each division.

    LED aperture requirements

    LED aperture brightness can be adjusted in software

    Camera

    Software controlled camera moves up and down

    PCB positioning and adjustment methods

    Universal fixture, positioning PIN, tool fixture

    Milling cutter diameter range

    0.8-3.0mm

    Milling cutter management

    The software can automatically adjust the height according to the thickness of the PCB board and the toughness length of the cutter to extend the service life of the cutter and standard tool detection.

    MES docking

    Open MES docking port function

    BAR CODE scan

    Open BAR CODE Scan Port Function

    Cutting speed

    0-100mm/S adjustable per second

    Working table

    two worktables

    Cutting function

    Can cut straight, curved, L-shaped, U-shaped

    Trouble shooting

    Software can detect failure points, have I/O port detection capabilities, and have detailed alerts

     

    Service

    Machine warranty 15 months. Our after-sales points are Suzhou, Dongguan, the United States, Brazil, Britain, France, and Turkey. Welcome to be our foreign agent.


    Model difference:

    Workbench

    Model

    Specifications

    Work Size

    Machine Dimension W.D.H

    Net Weight

    Double Tables

    YSVC-600-AS

    Standard Type

    350*350mm

    1382*1056*1500mm

    840KG

    Double Tables

    YSVC-600AW

    Widened

    500*500mm

    1682*1356*1500mm

    940KG

    Product Categories
                              Four-axis precision PCB Router Depanleing machine
                              Four-axis precision PCB Router Depanleing machine
                              Four-axis precision PCB Router Depanleing machine
                               
                              Detailed Product Description


                              Basic specifications:
                              01.   X, Y cutting speed: 0 ~100mm/s
                              02.   Machine Repeat Accuracy: ± 0.01mm
                              03.   X, Y1,Y2 ,Z Control Methods: Industrial IPC and PC
                              04.   X, Y1,Y2 ,Z Drive Mode: AC Fiber Optic Servo Motor
                              05.   Machine Operation and Data Storage: PC System
                              06.   Cutting accuracy: ± 0.05mm
                              07.   Spindle speed: Max 60000rpm
                              08.   Host voltage: 220V 1ψ 50 / 60HZ
                              09.   Air pressure supply: above 4.5kg/cm2
                              10.   Power Consumption: 1.8KVA
                              11.   Dust Collection: Lower Dust Collection (Standard) or Upper Dust Collection
                              12.   Dust collector voltage: 220V (380V) 3ψ
                              13.   Upper dust collector size: L650*W400*H1350mm
                              14.   Dust collector size: L665*W635*H1650mm

                               

                               

                               

                               

                               

                               

                               

                               

                               

                               

                               

                               

                               

                               

                              Technical Parameters

                              Statistics function

                              Both left and right board with statistics function

                              Information management function

                              Support MES information system to seamlessly connect equipment and information management, Open Ethernet Interface, and supports TCP/IP network communication protocol, and necessary related software and programs; Open the BAR CODE function port.

                              X.Y, Z, axis drive

                              Servo motor + screw, guide rail

                              Worktable input and output methods

                              Servo motor + screw, guide rail

                              Cutting product requirements

                              Left and right worktables can separate different products at the same time

                              Cutting height requirements

                              Left and right worktables can separate different heights and products at the same time

                              MARK point identification requirements

                              MARK points of different shapes can be identified, and MARK points can be freely set before each division.

                              LED aperture requirements

                              LED aperture brightness can be adjusted in software

                              Camera

                              Software controlled camera moves up and down

                              PCB positioning and adjustment methods

                              Universal fixture, positioning PIN, tool fixture

                              Milling cutter diameter range

                              0.8-3.0mm

                              Milling cutter management

                              The software can automatically adjust the height according to the thickness of the PCB board and the toughness length of the cutter to extend the service life of the cutter and standard tool detection.

                              MES docking

                              Open MES docking port function

                              BAR CODE scan

                              Open BAR CODE Scan Port Function

                              Cutting speed

                              0-100mm/S adjustable per second

                              Working table

                              two worktables

                              Cutting function

                              Can cut straight, curved, L-shaped, U-shaped

                              Trouble shooting

                              Software can detect failure points, have I/O port detection capabilities, and have detailed alerts

                               

                              Service

                              Machine warranty 15 months. Our after-sales points are Suzhou, Dongguan, the United States, Brazil, Britain, France, and Turkey. Welcome to be our foreign agent.


                              Model difference:

                              Workbench

                              Model

                              Specifications

                              Work Size

                              Machine Dimension W.D.H

                              Net Weight

                              Double Tables

                              YSVC-600-AS

                              Standard Type

                              350*350mm

                              1382*1056*1500mm

                              840KG

                              Double Tables

                              YSVC-600AW

                              Widened

                              500*500mm

                              1682*1356*1500mm

                              940KG

                              Online Message
                              Welcome message, we will reply within 24 hours!
                              *Subject:
                              *Your E-Mail:
                              (Please make sure your E-mail address is correct.
                              Else, the receiver cannot reply you afterwards. )

                              Content:
                              *Country/Region:
                              Your Company:
                              Your Name:
                              Tel:
                              Fax:
                              Related Product
                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                              CONTACT US
                              Contacts:Eva Liu +86 13416743702
                              Tel:+86-512-62751429
                              Skype:evaliuhuan
                              Email:sales@yushunli.com evaliu@hk-yush.com
                              Company Address:3 Building NO 11,Chunhui Road,
                              Suzhou Industrial Park,Jiangsu Province.China.
                              YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016